Pump foaming soap dispenser, don’t you know, it’s already sold a lot on the market now, it just provides hand sanitizer, and it is automatic, it is very convenient to use, and it is installed in many families. In the process of using pump foaming soap dispenser, because it is an automatic device, there will be some failures. The solution of this failure is definitely relatively unfamiliar to everyone. Then the editor will introduce the related knowledge of pump foaming soap dispenser fault repair. Let's take a look at repairing it yourself next time.

  If the pump foaming soap dispenser is left for a period of time, some soap may be agglomerated. If the amount of soap is small, stir with warm water. This can restore the soap to a liquid. If the above method is not feasible, remove the agglomerated soap. Remove the liquid, add warm water again, and use the soap dispenser repeatedly until the warm water drains from the soap dispenser, so that the entire soap dispenser can be cleaned.

  Note that the dust and impurities in the pump foaming soap dispenser will block the liquid outlet. If you notice that the soap in the inner bottle has changed, please replace the soap.

  If the soap is too thick, the pump foaming soap dispenser may not drain. To dilute the soap, add less water and agitate it.

Based on the above introduction, everyone knows how to use pump foaming soap dispenser. When there is a problem, you also know how to repair the soap dispenser. Compared with other automatic equipment, pump foaming soap dispenser is relatively simple, so the repair is also It won't be troublesome.